Is the Clone-A-Willy DIY dildo kit worth it?

[DrJacoby]

The idea of using a molding kit to make a replica of my dong has tantalized and intimidated me for years. Online reviews emphasize the difficulty and necessity of having at least one additional set of hands to keep a stiff member and manage the complicated production process simultaneously. My birthday is coming up and I thought it would be hot to make with my wife, but I’m not sure if it’s worth the money or difficulty.

Has anyone had experience with this? And a question specifically for other big dicked dudes - does the Clone-A-Willy kit really not provide enough silicone to capture a larger dong or is that just cap?

P.S. I recommend checking out the negative user review photos on Amazon to see some hilarious monstrosities.

 

[_mfrankb_]

I wrote up a review of my experience. You can find it here: Clone-a-Willy Review

 

[DrJacoby]

I wrote up a review of my experience. You can find it here: Clone-a-Willy Review

Cool! Looks yours turned out great. It sucks that you weren’t given enough mixture to fill the mold entirely and capture your length. That might be a dealbreaker for me.

 

[Jon1971]

Cool! Looks yours turned out great. It sucks that you weren’t given enough mixture to fill the mold entirely and capture your length. That might be a dealbreaker for me.

I thought you could order extra mix.

 

[chrisrobin]

The idea of using a molding kit to make a replica of my dong has tantalized and intimidated me for years. Online reviews emphasize the difficulty and necessity of having at least one additional set of hands to keep a stiff member and manage the complicated production process simultaneously. My birthday is coming up and I thought it would be hot to make with my wife, but I’m not sure if it’s worth the money or difficulty.

Has anyone had experience with this? And a question specifically for other big dicked dudes - does the Clone-A-Willy kit really not provide enough silicone to capture a larger dong or is that just cap?

P.S. I recommend checking out the negative user review photos on Amazon to see some hilarious monstrosities.

Are you going to use on yourself or your wife, if the latter what a wonderful thing to do together on your birthday, hands on the real thing and the replica....

 

[SlamminSammy]

I bought one a while back for my wife for when I travel, but we haven't made it yet.
I'm also going to practice sucking it!

 

[paskharen]

It works pretty well. You'll need a cockring to stay hard and will probably need to order an extra bottle of the mix.
You'd have to be relatively small to not run out..?

 

[Alex22876]

I tried it once and it was difficult. Reading up on it, the recommendations online are to have someone help you. That’s not a current option for me. It made a big mess when I tried to. I read somewhere to put newspaper down, which was a huge help. I have a lot of length, as some of the other posters mentioned, but I also have a left lean to my cock. This was difficult to manage since it wanted to touch the left side of the tube and mess everything up. I bought more mix, just mix, and I am going to try to make my own mold. I was thinking of using a large water bottle or a 2 liter soda bottle instead of the tube they sent. I have not had the time or interest in dealing with everything to be honest lol. I agree with the need to stay hard. I have always been worried about a cock ring showing on the mold. I am going to take some viagra and have some porn on with hot audio to keep me hard.

 

[dirk8989]

Did one myself. 1st attempt was a disaster. 2nd attempt success but lost about an 1" with the final product. Key is to get the timing down. As others have mentioned, wear a ring. U can buy aginate mold on amazon. As for the ur clone dildo, it's firm and not as flexible as what u might be use to.

 

[frutiger]

I tried using one a few years back, and I'm not huge by any means but I still ran into problems sizing the tube. If you have a curve and upward facing erection angle it makes the process much more difficult. The directions say that that you should modify the tube to accommodate this but cutting it and refitting to match your angle, but that is easier said than done. During my attempt this resulted in my head pressing against the side of the tube, so the final result came out kinda weird and flat on one side. My kit also came with a vibrator that your supposed to fit into the final model, but again because of my curve it didn't fit to well and looked a little worried in the final result. Lately I found the dildo material (silicone?) To be a little too hard to be comfortable,

A lot of people have a much better experience with the kit than I did, so you'll probably still have fun if you try. If I were to try again, I think I would try to put together my own kit with dental alginate and a higher quality silicone.

 

[techpump]

I've made a few excellent replicas of my cock with my wife's help. Get the alginate on Amazon, its easier to deal with per temperature, and you can mix the ratio to your cock size perfectly.
Use a giant bowl so she can mix the alginate and water with a whisk, and really whisk the fucking shit out of it to get all the lumps out. As brisk and fast as possible is the key.
Take an ED med to make sure you stay completely hard throughout the mold setting. Also make sure the mold tube is your size.
Cock ring probably helps, but I lose wood when I wear one if its too tight and is irritating.
I've lost almost an inch from my full bone pressed length, I need to wear a ring with a strap that pulls my fat pad back and exposes my whole cock to get the fullest length possible in the tube, hopefully making a mold in a week or two.
Check my profile pics for molds I've made, they are just white in color cuz I use Dragon Skin silicone, its the best. You can get this stuff called Slacker and mix some in and it makes it more soft and pliable but still firm enough to use. If you are really good at it you can make a dual density version of yourself , but making the inner firm core is hard to nail down. It can be done, it just takes work. Have fun!

 

[DrJacoby]

This is all extremely helpful! Thanks guys

 

[Thirdlegproduction]

So you're supposed to mix a sillicone powder in a bowl for 2 minutes while maintaining an erection and not spill anything on the floor and then stick your dick in a cold sillicone mold for another 2 minutes if I remember correctly

Suffice to say I managed to stay erect during the mixing but turned semi while in the cold mixture while waiting

Was considering trying again with the balls attached

I also considered ordering a 3d printer and doing a 3d scan with free apps and then print the mold instead of the penis and then fill it up with different kinds of silicone mixtures like glow in the dark or more flexible materials

 

[techpump]

So you're supposed to mix a sillicone powder in a bowl for 2 minutes while maintaining an erection and not spill anything on the floor and then stick your dick in a cold sillicone mold for another 2 minutes if I remember correctly

Suffice to say I managed to stay erect during the mixing but turned semi while in the cold mixture while waiting

Was considering trying again with the balls attached

I also considered ordering a 3d printer and doing a 3d scan with free apps and then print the mold instead of the penis and then fill it up with different kinds of silicone mixtures like glow in the dark or more flexible materials

very much into the 3D scan and print if you find out more let us know!

 

[Jon1971]

I'd be more for just popping a Viagra as insurance that it would stay at max hardness long enough to do the procedure properly.

 

[rbi99]

I would have loved to mold myself and used it on my wife. Seeing "myself" pound her would have been a turn on for both of us. Never tried it though. I did buy a dildo that closely mimicked my size, but truth be told, she preferred the smaller dildo we had.

 

[Been fun]

I made one a few years back it was fun but hard to stay hard. It turned out a bit smaller than the real thing.

 

[Chilldan]

Worked well for us but we used a cock ring, some viagra and wife mixed everything up and played with my balls while I was in the mould. Not a solo job at all lol

 

[AussieScooter]

I’ve got the mold with the ball inclusion… but haven’t don’t it yet. To my thinking even if the full size of my balls isn’t covered, my length will be. Can’t wait to mold it, I get hard just thinking about it.