Sleeves for XL Pump Tubes

[ThickAndZesty]

Hey All,

Just wondering what sleeves people are using for their large pumps.

I have a 3.5" diameter tube from LeLuv, and cannnoooottt find a sleeve that is suitable for it.
All of the sleeves that I have found are too thin, and wind up pulling my whole fupa in with my unit. Sometimes it grabs a ball or two .

Thanks in advance!

 

[Harry Palmer]

Do you mean that you're looking for a cushion?

 

[ThickAndZesty]

Yeah, like the rubber gasket that wraps to the opening of the tube, so that all of your bits don't get pulled in.

Like the product in this image. That thing is great, but they only make them for tubes with diameters up to 2.5" or 2.75". I am looking for something like like this for tubes that are diameter 3.5" or more. Or am wondering what people use as a substitute.

The issue that I am having is that I haven't been able to find a sleeve that is both wide enough *and* thick enough. The ones that you can get from LeLev, for example, are good diameter, but much too thing.

 

[Harry Palmer]

Look up the Oxballs Juicy XL. They make a smaller one but I use the XL with my 3" cylinder. It's got plenty of padding. Put it on like a cockring first, then slide your cylinder on top of it. They come in this blue and black. Be aware that they're kind of pricey.

 

[wizard1]

I use a foam toilet base seal from the hardware store to seal up my 3 inch

 

[ThickAndZesty]

Look up the Oxballs Juicy XL. They make a smaller one but I use the XL with my 3" cylinder. It's got plenty of padding. Put it on like a cockring first, then slide your cylinder on top of it. They come in this blue and black. Be aware that they're kind of pricey.

This is great, thanks!

I use a foam toilet base seal from the hardware store to seal up my 3 inch

Haha I was wondering if hardware supplies might be an option.
Are you talking about something like this? From Canadian Tire: Tank to Bowl Gasket:

 

[magnificent10]

This is great, thanks!


Haha I was wondering if hardware supplies might be an option.
Are you talking about something like this? From Canadian Tire: Tank to Bowl Gasket:

View attachment 163469881

With regard to the brand ox balls; I have a 3 1/4 inch elliptical cylinder and I have to use the ox balls extra extra large to snuggly fit. And yes, it is expensive but it lasts a couple of years with daily use. Just take care of it. don’t use any kind of lube other than that which is designed for silicone.