Your favorite ball stretcher?

[evolution]

Cool so you advise to get it. I am worried about internal circumference - it says around 7.62 cm. I checked it and it looks very tight to me - or it is a illusion? My balls are not so small I don't want to cut the blood flow. Usually so far I had troubles with the size of all stretchers and I made my own parachute for night.
My circumference of the skin above balls in the middle between penis and balls when relaxed is around 12-13 cm, I can stretch it to max 11 cm but not to 7.6 cm.
How much is this silicon elastic?

Sorry @FaceIt , I was focusing on length. If the internal circumference is too tight, then you would not want to get this unit. While the silicone is quite stretchy, it wants to return to its relaxed state, so it will soon feel uncomfortable. You can get it on but cannot wear it in comfort. It is quite difficult to find things wide enough to be comfortable for an endowed man, but don't settle out of frustration.
I have found that over time the longer your hang becomes, the narrower rings you can wear with comfort-midspan. But that comes with time. It sounds like this is not the time for that device.
I do favor oval metal rings as they come in widths & you can get something wide enough to comfortably take all you hang in it while remaining narrow enough your smaller ball wont pop through. I have never seen an oval stretchy.

 

[allmanbud]

Sorry @FaceIt , I was focusing on length. If the internal circumference is too tight, then you would not want to get this unit. While the silicone is quite stretchy, it wants to return to its relaxed state, so it will soon feel uncomfortable. You can get it on but cannot wear it in comfort. It is quite difficult to find things wide enough to be comfortable for an endowed man, but don't settle out of frustration.
I have found that over time the longer your hang becomes, the narrower rings you can wear with comfort-midspan. But that comes with time. It sounds like this is not the time for that device.
I do favor oval metal rings as they come in widths & you can get something wide enough to comfortably take all you hang in it while remaining narrow enough your smaller ball wont pop through. I have never seen an oval stretchy.

I will have to try the oval metal weights!
I hear that they are more comfortable to wear for long periods.
I just find that those weights are a BITCH to put on!
I keep losing the little screw or wrench while fisting my balls with my other hand!
Any suggestions to make it easier to put on?

 

[evolution]

I will have to try the oval metal weights!
I hear that they are more comfortable to wear for long periods.
I just find that those weights are a BITCH to put on!
I keep losing the little screw or wrench while fisting my balls with my other hand!
Any suggestions to make it easier to put on?

For your existing round rings, put on 2 of those rubber rings, or hairbands, etc. to squeeze your hang. Doing that can help getting the round metal rings on if you put it on between those two helpers. I also, once the ring is seated, will turn my balls in one direction, then spin the ring in the other direction - just makes everything sits tight, then I can put the screw in. Then I untwist the balls. Then I give the ring a last spin to be sure everything is settled & comfortable. Of course, lotion makes this easier, but makes the ring hard to hold.

That's why I like the oval, much easier to put everything in & shove to the side, out of the way, allowing you to put on the 'cap' & screw it on with pinching or catching any hairs.

Secret Leather used to sell a key on a chain that looks like a cross. Anyone sees you wearing it, all they see is a cross. So that's an easy way to keep track of a key. You can also get those multi-set tools that have 3 or 4 keys on a side, a variety of sizes - You can remove the correct key from one of those tools & put it on a key ring as they normally have a closed loop at one end to attach it to the multi-tool.

Just remember the oval rings also come in a variety of widths. I try to find a minimum of 55mm / 2.75" inside diameter for an oval.
Some ovals look really wide & I wonder if they'd get in the way walking. I don't know, but it seems so.
Finally, I strongly encourage getting units with rounded edges, I find a square edge highly uncomfortable on such sensitive skin as the scrotum.

 

[FaceIt]

Sorry @FaceIt , I was focusing on length. If the internal circumference is too tight, then you would not want to get this unit. While the silicone is quite stretchy, it wants to return to its relaxed state, so it will soon feel uncomfortable. You can get it on but cannot wear it in comfort. It is quite difficult to find things wide enough to be comfortable for an endowed man, but don't settle out of frustration.
I have found that over time the longer your hang becomes, the narrower rings you can wear with comfort-midspan. But that comes with time. It sounds like this is not the time for that device.
I do favor oval metal rings as they come in widths & you can get something wide enough to comfortably take all you hang in it while remaining narrow enough your smaller ball wont pop through. I have never seen an oval stretchy.

Thanks, I needed to look a lot for a good metal weight which were large enough in diameter to keep balls\skin comfy.
I don't know why they all make it usually so small inside, it is ridiculous. I wish I had my own 3D printer, I would craft it myself.
I presume there are other advised stretchers good like oxballs? I could look for smth better then.

I cannot wear my metal weights anymore as I am too active daily so silicone is a good option.
My parachute works only at night or when I am doing nothing so max 6-8h per day.
Sometimes I wear it connected by rubber band to my foot - then there is a contact tension like on the picture in the bed, also with rubber band.

Spoiler

 

[allmanbud]

For your existing round rings, put on 2 of those rubber rings, or hairbands, etc. to squeeze your hang. Doing that can help getting the round metal rings on if you put it on between those two helpers. I also, once the ring is seated, will turn my balls in one direction, then spin the ring in the other direction - just makes everything sits tight, then I can put the screw in. Then I untwist the balls. Then I give the ring a last spin to be sure everything is settled & comfortable. Of course, lotion makes this easier, but makes the ring hard to hold.

That's why I like the oval, much easier to put everything in & shove to the side, out of the way, allowing you to put on the 'cap' & screw it on with pinching or catching any hairs.

Secret Leather used to sell a key on a chain that looks like a cross. Anyone sees you wearing it, all they see is a cross. So that's an easy way to keep track of a key. You can also get those multi-set tools that have 3 or 4 keys on a side, a variety of sizes - You can remove the correct key from one of those tools & put it on a key ring as they normally have a closed loop at one end to attach it to the multi-tool.

Just remember the oval rings also come in a variety of widths. I try to find a minimum of 55mm / 2.75" inside diameter for an oval.
Some ovals look really wide & I wonder if they'd get in the way walking. I don't know, but it seems so.
Finally, I strongly encourage getting units with rounded edges, I find a square edge highly uncomfortable on such sensitive skin as the scrotum.

MANY thanks for your help bud!!
I appreciate that!
Will follow your advice!!!

 

[FaceIt]

A small update from me, instead of getting a one from the USA which is too expensive, I decided to order it on aliexpress.... for 2-3 usd.... perfectly soft silicone. I got two I think most of these shops with sexy stuff is too greedy to pay even 20x more than a real value...

 

[Anonymousfornow]

Has anyone used these? https://www.amazon.com/Perfect-Fit-...fab-b905-b489b56d52dd&pd_rd_i=B010QXWDYG&th=1

 

[LowerCapeCod]

Has anyone used these? https://www.amazon.com/Perfect-Fit-...fab-b905-b489b56d52dd&pd_rd_i=B010QXWDYG&th=1

Interesting

 

[Jon1971]

I have a few, but my favorite is the large oval with a snap in ball bearing closure. I like that no tools are required to put it on or take it off.

I have others, but they're not as comfortable for long term wear.

 

[rbi99]

Has anyone used these? https://www.amazon.com/Perfect-Fit-...fab-b905-b489b56d52dd&pd_rd_i=B010QXWDYG&th=1

I haven't, but I would prefer weights for three reasons: I love to touch and feel my closely shaved balls when they are tightly squeezed by my weights, and I like to see them as well. The third reasons is as I stretch out I can add more weights, both in the present and more so in the future.

 

[Electric blue]

Like a ball weight & add on cockrings for more weight when I can. Wear it to work all day most daysView attachment 782977

Yes !!!! Lovely

 

[Electric blue]

I have a machine shop , I made a ball weight for my own use ,Out of solid bronze, split it in two and polished all the radii , it looks like gold , and it's held on with a spring clip ,no nut and bolts .It's about 18 oz , I can only wear it about an hour at a time , I also am making a long spring attachment for my balls rings that tie just below my knee , like a sock garter , this way there is constant pressure on my ball sack , the spring is just enough to gently pull , but pull all day if needed

 

[allmanbud]

I have a machine shop , I made a ball weight for my own use ,Out of solid bronze, split it in two and polished all the radii , it looks like gold , and it's held on with a spring clip ,no nut and bolts .It's about 18 oz , I can only wear it about an hour at a time , I also am making a long spring attachment for my balls rings that tie just below my knee , like a sock garter , this way there is constant pressure on my ball sack , the spring is just enough to gently pull , but pull all day if needed

HEYYYYY
Am interested in this!
Tell me MORE!!!

 

[Electric blue]

Tell you what ?

 

[Electric blue]

I gave this some thought , my anonymous nature keeps me from giving out any info of my self or home address , And I know it could be profitable

 

[Jon1971]

HEYYYYY
Am interested in this!
Tell me MORE!!!

I think we need pics...

 

[Marlin1]

This is mine stretchers at the moment 120mm 1.5kg
Can only wear it for about 1h though then I take the top oval one off for a break

 

[Electric blue]

Very nice indeed , walking can lead to a swagger lololol

 

[Mariano12]

Hi All,

I´ve been reading whole thread and I have a few questions. I tried to start into ball stretching, but...

How do you know your correct size diameter? (I tried to measure it but it depends on the weather totally for me)​

My first ball stretching ring was like a generic Inside Diameter (35 mm) and magnetic from Aliexpress, I tried several times to used it but it always hurt my sack, and magnetic lock wasn´t too strong but I guess my sack it´s a little more bigger.

I got some sillicon toys. the black one, I love how it looks on me but it always one ball lift and get stock in the toy haha. I can only wear it for a 30 min as maximum.
For the other two, It´s amazing but at certain point my balls feel so cold. is that normal?

 

[Electric blue]

It's that way for most guys , you have to use trial and error, I use brass rings they fit tight going over my fist ball then even tighter with my second ball , but that's what I want . I want to feel the joy of punching them in a place They don't belong , I can get 7 on at a time ,, lots of practice, lots of time , now I'm wearing just 4 with a cock and ball ring , just slightly larger , nice tight hard push fit
It's what I'm after ,